Changing the Temperature Settings on Your Chattanooga Hydrocollator
okay hello I’m BG aircon and that right
now I’m going to show you how to change
the temperature setting for your
Chattanooga e – this is that’s the model
right here close to the Chattanooga
hydroxy leader systems the tanks come
with a dial on the back that allow you
to change the setting I believe from the
factory they come set at approximately
one hundred and sixty degrees
we’re transitioning from Chattanooga
packs to a new pack a gel pack which
doesn’t require as much heat so it’s
actually safer for the patients so first
I’m going to pull this out turn this
around and you can kind of walk in zoom
up here this is this is the little knob
here it doesn’t have any kind of do it
actually absent an obvious little
spindle sticking out if you turn it
counterclockwise this way you’re turning
the temperature up I believe if you turn
it this way like that I’m turning the
temperature down I’ve already played
with this obviously there’s all the
water here so it takes a while for the
temperature to change but you tweak it a
little bit you turn it a little bit
clockwise you take a thermometer this is
a little meat thermometer here this unit
does it come with a thermometer and I
set this one and it’s a little bit over
130 at that temperature we can use a gel
that’s about 135 almost at that
temperature we can actually pick the gel
packs up with our bare hands
I’m not worried about the burden the
water itself is hot it’s not going to
stall all this we put a moisture barrier
between this pack and the patients that
keeps keeps the pack clean the packs we
come in contact with the patient or they
need if you want a very easy to have to
run underneath water they don’t require
these big bulky expensive terry cloth
anymore and this is in my opinion it’s
definitely a safer way to go if you’re
worried about so that’s how you change
the setting of the temperature I hope
that helps you out thank you
- Full fiberglass insulation to prevent heat loss
- Dependable, rugged stainless steel design
- Simple to fill with water. No plumbing required
- Constant temperature of HotPacs is maintained
- Mobile units are equipped with 8 cm swivel, rubber casters for friction free movement about the clinic
A Chattanooga hydrocollator mobile heating unit uses a patented technology that is very low energy and therefore very environmentally friendly. It’s so efficient that the unit will only use around thirty-seven percent of your regular household energy consumption, making it perfect for households without a lot of excess heat and not necessarily in need of high temperature. It also gives you the ability to adjust the thermostat to suit your needs in any season.
This mobile unit is also known as the Chattanooga hydrocollator and is made out of a patented material, which means it is very lightweight, easy to carry and extremely durable. This material also has a very large surface area, so the unit can put out a lot of heat without taking up too much space. The heat that is put out is also high enough to be comfortable to everyone who has been in one of these units.
The Chattanooga hydrocollator mobile unit can actually be operated by you without the need for anyone else having to do anything. It is fully automated, so you don’t have to worry about anything when you are not home. You simply plug it in, turn it on, set the temperature and then leave it. After a while it will start to cool down, so this is the perfect time to come back and turn it off.
When you get into a Chattanooga hydrocollator mobile unit, the unit will heat the air that you breathe in. The water from the pump will then circulate through the unit, making it very effective in keeping your entire home warm. If you live in an older building, then a Chattanooga hydrocollator mobile unit may not be the best choice because the pipes and wiring in older buildings are not in a very good condition.
The Chattanooga hydrocollator mobile unit comes in two sizes – small and large. Since it is portable, it is suitable for people who want a smaller unit or who have a very busy lifestyle. Overall, this mobile unit is very affordable, easy to install, durable and easy to use.
Chattanooga Hydrocollator FAQ
Chattanooga M-2 hydrocollator
Chattanooga M-2 Hydrocollator is a unique therapeutic gear that was developed in Chattanooga, TN by Industrial Therapists, Inc. It is a unique system that is made of industrial stainless steel tubing coated with Thermoplastic Polyimide (PIP). This tubing has a double wall thickness to improve dimensional stability and decrease flexing/flexing. This reduces or eliminates most of the vibration common with other vacuum forming devices. The gearbox is also an improvement over traditional vacuum forming gearboxes. This gearbox keeps the pump and compressor completely isolated from the impeller.
This hydrocollator is used in various industries such as Pharmaceuticals, Biotechnology, Biomedical Applications, Personal and Beauty Products, Textile, Health Care, Automotive, Power Generation, packaging, Conventional Engineering and much more. These hydrocollators are thermally controlled continuously to maintain steam contents at the right temperature for optimum therapeutic benefit. Full-scale manufacturing has been completed to meet all regulatory requirements in the United States and Europe. Full-scale production runs have been completed for the United States, Japan and Korea.
Chattanooga M-2 Hydrotherapy Equipment is designed to be user-friendly with both manuals and electronic versions. It has an easy-to-read manual with complete instructions including safety precautions. It has the ability to do a variety of different hydrotherapy applications including:
Chattanooga E-1 hydrocollator
This portable device is used as infill for evaporator coils that heat water in a hot water tank. There are many models and types of this equipment available, some of which have the vapor-compression refrigerant valve and adjustable baffle valves to control the flow rate of vapor into the hot water tank.
This heating appliance can be used for industrial applications and commercial applications and there are two kinds of Chattanooga E-1 hydrocollator available, namely, the hotpots and the electric models. Hotpacs have been in existence since the early 1950’s and they have gained popularity worldwide. Electric models are gaining popularity amongst industrialists as they do not need any electricity during operation. The biggest advantage of using a Chattanooga E-1 hydrocollator over an electric model is that hotpacs do not suffer from the problems associated with lubrication which electric models suffer from.
Chattanooga hydrocollator repair
Chattanooga hydrocollator repair is a company located in Chattanooga, Tennessee that makes and sells pumps and other water control devices. Chattanooga is the third largest city in the state of Tennessee and is in the geographical center of Middle Tennessee. The city is located on the banks of Tishoming River and was developed around a channel of the Tishoming River. This channel passes through Chattanooga. The city is surrounded by hills which form the hills of Hillsboro. These hills are a part of the landscape of this region and make it an ideal place to locate a Chattanooga hydrocollator repair shop.
There are several types of pumps available from Chattanooga. Among these pumps are the wax jet heater, the screw top dryer, and the hybrid screw top dryer. Among these jet heaters the jet heater is the most popular. This type of heat pump works by sending warm air into the surrounding area by using a fan. As such, it can be used in the same manner as an outdoor radiant heating system, but it also has the advantage of not getting affected by moist heat that can be caused by passing through moist heat sources nearby.
All types of equipment provided by Chattanooga hydrocollator repair include the wax jet heater, the screw top dryer, and the hybrid dryer. In the process of repair and replacement, these pieces of equipment are made to work as a single unit. This makes them much easier to install and replace. It is advised that you contact the manufacturer of your equipment before purchasing a replacement piece so that it can be sent to you as a whole with all parts fitted and working.
Chattanooga hydrocollator thermostat
Chattanooga, TN is home to a unique hydrocollator, or hydronic heater, known as the Chattanooga Hydrocollator (CHTS), which is unique in that it can provide both heat and cool air. The Chattanooga Hydrocollator is part of a group of hydronic appliances collectively known as SS2 and CHTS is the only one of its kind in Chattanooga. It is also unique in that it uses three main controls, namely, the on/off switch, the input switch and the temperature control switch. In addition, it is one of the few hydronic heating systems that has a bypass circuity in the heater core. The CHTS is constructed with an aluminum frame, which is extremely lightweight and has been constructed by professionals to precise engineering specifications.
One of the many benefits of having this hydrocollator thermostat is that it offers “on” and “off” switches, which are located on the same box, that other types of hydronic control systems do not have. If there is a power outage, the heat pump will still work, with the water flowing through piping that is connected to the Chattanooga Hydrocollator thermostat core. Once the power returns, the Chattanooga Hydrocollator will shut down because the water is reaching the shut off valve, which is located at the bottom of the heater core. Once the water reaches this location, it will be automatically turned off, thereby saving the occupants of the home or business the time and money that it takes to manually turn the system off after a power outage. In addition, if there is a gas emergency, the Chattanooga Hydrocollator will automatically turn itself off, without requiring any human intervention.
Another benefit of the Chattanooga Thermostat is that it has a lifetime warranty of 20 years, which is one of the longest warranties offered by this type of system. In addition, this system is made with an extremely high efficiency ceramic disc, which makes it able to provide comfortable heating rates even when one of the most energy-draining sources, air conditioning, is in use. This is one of the primary reasons that this type of thermostat is so popular amongst businesses, homes, and offices.
Author: Dr. Dave MilesAll information provided by Community Clinic Association clients and approved by Dr. Dave Miles.
Support us: Coub / ProductHunt. Last update on 2021-08-25 / Disclaimer: as an Amazon Associate a Community Clinic Association team earns from qualifying purchases.